廣州金屬線調直機
概述:
SCM系列鐵線調直切斷機
SCM Series Automatic Wire Straightening and Cutting
Machine
設備主要特點
1.該設備主要用于將圓或扁的鐵線,不銹鋼線,鍍鋅線,鋁線,銅線
本信息已過期,發布者可在"已發商機"里點擊"重發"。
SCM系列鐵線調直切斷機
SCM Series Automatic Wire Straightening and Cutting Machine
設備主要特點
1.該設備主要用于將圓或扁的鐵線,不銹鋼線,鍍鋅線,鋁線,銅線等自動調直,按照設定長度,自動切斷。
2.有傳統機械式和數控液壓式兩種。
3.機械式鐵線調直切斷機,手動設定調直切斷長度,操作與維護都比較簡單。主要是用于調直切斷直徑小于10毫米,最大切斷長度小于2米的普通鐵線。
4.數控液壓式鐵線調直切斷機,加工性能較強,幾乎可以加工任何直徑,任何長度的鐵線,自動化程度高,數控設定調直切斷長度,并設有安全裝置,自動計數停機系統。主要用于調直切斷建筑用冷軋螺紋鋼筋、熱軋鋼筋、熱軋圓鋼及冷軋圓鋼等。
Main Application and Characteristic
1.The equipment is mainly used for automatically straighten round or flat wire, stainless steel wire, galvanized wire, aluminum wire, copper wire,and cut automatically according to the preset length.
2.There are two kinds of models:Traditional Mechanical Model and Numerical Control Hydraulic Model.
3.“Traditional Mechanical Model Automatica Wire Straightening and Cutting Machine”,need to set the straightening and cutting length manually,then the machine will do that automatically.
Operation and maintenance are simple. It is mainly used for straightening and cutting the wire with diameter less than10 mmand the maximum cutting length is less than 2 metres.
4.“Numerical Control Hydraulic Model Automatica Wire Straightening and Cutting machine”,processing performance is strong, almost can process any diameter, any length of wire, high degree of automation,automatically set straightening and cutting length,adopted with the safety device and automatic counting & stop system.Mainly used for straightening and cutting building cold-rolled steel wire and rebar, hot-rolled steel wire, hot-rolled round steel wire and cold-rolled steel bar etc..
技術參數
參數/型號 Parameter/Model |
傳統機械式 Traditional Mechanical Model |
數控液壓式 Numerical Control Hydraulic Model |
|||||
SC0.8-2.5 |
SC2-5 |
SC5-9 |
SC9-12 |
SC4-12 |
SC6-14 |
SC8-16 |
|
鐵線直徑 Wire Diameter |
0.8-2.5MM |
2-5MM |
5-9MM |
9-12MM |
4-12MM |
6-14MM |
8-16MM |
最大調直切斷長度Max Cutting Length |
0-1000 MM |
0-2000 MM |
0-2000 MM |
0-2000 MM |
200- 30000 MM |
800- 50000 MM |
800- 60000 MM |
調直速度 Straightening Speed |
15-22 M/Min |
16-24 M/Min |
16-24M/Min |
16-26 M/Min |
20-50 M/Min |
20-60 M/Min |
20-70 M/Min |
電機功率 Motor Power |
0.55+ 0.55KW |
0.55+ 1.55KW |
1.5+ 5.5KW |
2.2+ 7.5KW |
3+3+10 KW |
4+4+11 KW |
5+5+12 KW |





- qq2307196008qq發布的信息
- 廣州FN-100濾網滾焊機 散熱器滾焊機 油箱滾焊機
- FN系列氣動交流滾焊機 整機特點 1.包含兩種基本的類型:橫縫焊接和縱縫焊接。 2.一臺機器可以同時具備橫縫焊接和縱縫焊接兩種功能,只要將轉換一下上電極輪的方向和更換 一下下...
- 廣州MF系列中頻逆變直流點焊機 汽車配件點焊機 剎車片點焊機
- MF系列中頻逆變直流電阻焊機 MF Series Middle Frequency Inverter DC Welding Machine 主要功能與應用 1.電阻焊是靠焊接電流通過工件而工件本身的電阻產生的高溫熱來...
- 金屬網片修邊機,高速修邊機
- ZF系列修邊機 使用范圍及規格參數: 該機器主要用于線類金屬網片周邊修整,修整切邊直徑為φ1-φ10,修整網片大小不限,可以通過輔助工裝協助完成,切削速度快,端口平整,操作簡便。 ...
- 方線,扁線,圓線打圈機,高精度打圈焊接一體機,廣州卷圓機
- 全自動數控金屬線與金屬片打扣成型機 設備主要特點: 1.金屬線與金屬片成型機,也叫打扣機,主要用于將各種金屬線材,金屬片材自動調直,切斷,折彎成型為各種不同的2維或者...
- 原裝美國進口壓力測試儀,焊接壓力測試儀,拉力測試儀,彈簧
- DFI系列壓力測試儀 DFI系列壓力測試儀是我們公司最新的一款微處理液晶式壓力測試儀器。既可測量壓力,也可用測量重量。 廣泛應用于各種壓力測試工作,如焊接壓力測試,材料測試機,印...
- DN系列氣動交流點焊機,鐵板點焊機,鈑金點焊機
- DN系列氣動交流點凸焊機 整機特點 1.按照國際ISO標準化進行生產,并且通過歐洲CE認證。 2.歐洲技術的電腦控制系統,配有塑鋼透明安全蓋,確保了對焊接電流,焊接電壓和焊接時間等的...